High Quality for Sand Washer - GF Vertical Air Classifier – Guote

Product introduction:
The whole set of classifier consists of air flow classifier, cyclone collector, pulse dust collector, high pressure induced draft fan and electric control cabinet.Airflow classifier is a forced classifier with secondary air intake and vertical mounted large leaf wheel.Work material under the action of the gravity of the induced draft fan by the tube body to enter, and rise to the partitions, as a result of the grading impeller rotor high-speed rotation, is constrained by the particle grading, produced by the rotation of the impeller of the centrifugal force and centripetal force caused by induced draft fan, when particles by centrifugal force is greater than the centripetal force, more coarse particle classification diameter stall is flung to the cylinder along the wall fell, the secondary air through the air inlet into the uniform distribution on the cone, the coarse particles have wind screen will be mixed or adhesive powder in the coarse material separation and clean.The coarse material after separation is collected and discharged by the discharge device, and the fine powder below the grading diameter enters the cyclone collector and pulse dust collector with the gas-solid two-phase flow, and the purified gas is discharged by the induced draft fan.
Application:
Screening and grading of ultrafine powders.

Outstanding Advantage:
1.The multi-stage series structure can be adopted, and the products with several particle size segments can be graded at the same time to obtain the ideal particle size distribution.
2.High efficiency and big processing. Adopt low speed vertical single impeller classification structure, stable material flow field, large equipment processing capacity, high classification efficiency.
3.Wide grading range. The grading points are adjusted freely by the speed of the grading impeller and the air volume of the induced draft fan to obtain the required products. The grading range is wide.
4.High classification accuracy. The classifier structure has been specially designed to cut off all large particles with high classification accuracy and strict control of large particles.
5.High purity without pollution. The inner part of the classifier is protected by ceramic, with less wear and tear, no pollution and high purity.

The working principle:
The whole set of classifier consists of air flow classifier, cyclone collector, pulse dust collector, high pressure induced draft fan and electric control cabinet.Airflow classifier is a forced classifier with secondary air intake and vertical mounted large leaf wheel.Work material under the action of the gravity of the induced draft fan by the tube body to enter, and rise to the partitions, as a result of the grading impeller rotor high-speed rotation, is constrained by the particle grading, produced by the rotation of the impeller of the centrifugal force and centripetal force caused by induced draft fan, when particles by centrifugal force is greater than the centripetal force, more coarse particle classification diameter stall is flung to the cylinder along the wall fell, the secondary air through the air inlet into the uniform distribution on the cone, the coarse particles have wind screen will be mixed or adhesive powder in the coarse material separation and clean.The coarserial after separation is collected and discharged by the discharge device, and the fine powder below the grading diameter enters the cyclone collector and pulse dust collector with the gas-solid two-phase flow, and the purified gas is discharged by the induced draft fan.

Technical parameters:

• Air Classifier For Quartz
• Fine Powder Air Classifier
• Magnetic Separator For Sand
• Sand Sieve Machine
• silica sand sieve machine
• Suspended Type Magnetic Separator