Factory Supply Dry Overband Magnetic Separator - GKS Tailings Dehydration Screen – Guote

Product introduction:
Tailings dehydration screen is suitable for materials with small particle size, such as fine sand, tailings, tailings dehydration and drainage equipment, compared with the ordinary linear vibrating screen, tailings dehydration screen has the advantages of large processing capacity, good dehydration effect, low moisture content of finished products after dehydration, widely used in the industry, high cost performance.
Application:
Suitable for small particle size materials, such as fine sand, tailings, tailings of the dehydration and drying.
Highlight the advantages of
Stress is reasonable
Finite element structural analysis software is used in the design of the whole machine to ensure the reasonable strength, stiffness and force of the screen frame, as well as the light weight and low energy consumption.
Long service life
Screen plate is made of imported polyurethane material with high porosity, good water permeability and long service life.
Join a firm
Torsion shear high-strength bolts are used for the connection between the side plate and the beam, the motor seat and the strengthening plate. There is no welding seam, which avoids the cracking problem of the side plate caused by the welding stress.
Increase dehydration area
The screen surface of pre-dehydrated sieve plate should be installed at a 45 degree Angle to the horizontal, and the negative inclination of the dehydrated sieve plate should be installed to increase the dehydrated area and urge the material to dehydrate to form the filter layer as soon as possible.
Continuous work
The power source adopts vibration motor, no bearing, coupling and other vulnerable parts, simple structure, easy installation and maintenance, low maintenance cost, can work 24 hours continuously.
High processing power
High working frequency, high vibration intensity, low moisture content and high unit capacity.
The working principle of
Filling tailings by feeding box (or cyclone) evenly into the sieve into the mouth, with the first level into 450 installation of sieve plate predewatering removal about 1/3 of the water, into the plane after the integration of a sieve plate and the tilt of the sieve plate, appear in the accumulation of material, material particles by gravity settling, began to form a thin filter layer, filter layer and prevent the remaining particles through the sieve, the filter layer gradually thickening.
Failed to thoroughly and form pool of water in the upper filter because the filter layer is thinner, water gradually under strong motion off gradually, high frequency low amplitude vibration state, make form a filter layer of the tailings particles such as more and more dense, and vibration to the discharging mouth, material forming filter cake shape, the moisture in the material in addition to the part from the screen surface removal, the rest due to capillary action attached to the material surface, due to the screen surface installation, negative Angle from discharging mouth water not overflow, but flow constraints for pool, thus complete the material dehydration.

• Ball Mill Machine
• Cross Belt Magnetic Belt Separator
• Dust Collector
• Magnetic Separator For Conveyor Belts
• Quartz Sand Making Machine For Production Line
• Small Magnetic Separator